UCI Ultrasonic Hardness Tester Novotest T-U3

£1,455.00

The Ultrasonic Contact Impedance (UCI) probe is used for measuring the hardness value of small items, objects with a thin wall, complex form, and to measure the hardness of surface hardened layers.
Built-in camera allows user to picture of testing object and mark tested area with corresponding hardness value.
UCI Hardness Tester NOVOTEST T-U3 has the sealed housing with rubber protective strips, it is ideal for use in workshop, and field conditions with high humidity, dust, etc. The hardness tester has frost-resistant display, which allows user to use the device at any season and in any climatic zone of the Earth.
The device has PC software with a comfortable and intuitive interface.

 

UCI method for the hardness testing
The UCI hardness measuring method complies to ASTM A 1038.
The ultrasonic contact impedance (UCI) probe is purposed to be used for hardness measuring in the case of the testing area minimal thickness (from 1 mm), objects of complex surface shape, and for measuring surface hardened layers hardness.
This method is very fast and easy: place the probe on the tested object surface, press the probe with the required effort to the surface and save the hardness value, shown on the display of the device. Small size diamond indenter allows measuring hardness value of all items, which are thicker than 1 mm. The UCI method of hardness testing is the least destructive because the hardness tester NOVOTEST T-UD3 with UCI probe leaves much smaller prints (imprints) than the majority of bench hardness tester would. That’s why a portable hardness tester with UCI probe is the best choice.

We have the CE certificate of conformity for Portable UCI Hardness Tester NOVOTEST T-U3.
Delivery normally 7 – 10 days from receipt of order / payment

 

Description

UCI Ultrasonic Hardness Tester Novotest T-U3

  • Hardness measurement of any mass products with a thickness more than 1 mm – inaccessible to the dynamic (Leeb) hardness testers (small parts, thin-walled structures, pipes, tanks, steel sheets, articles of complex shape, hardness control of metal coatings, etc.)
  • Measuring the hardness of the surface hardened layer
  • Small imprint after measuring (mirror surfaces of shafts necks, blades, gear teeth, etc.)
  • Wide range of hardness testing
  • Various measurement modes
  • Calibration of any scale in any range
  • Convenience and ease for measurement
  • Optimized number of buttons
  • Large full color graphic display with bright back-lighting
  • Calibrations stored in memory of probe
  • Extended temperature range (frost, down to – 40°C)
  • Internal memory and communication with PC
  • New, intuitive menu with tips on the buttons
  • Optional wireless mini printer
  • Water resistant case
  • Rubber protected bumper
  • Has different operating modes:
    • Graph – the mode of building of graph
    • Histogram – the mode of building of histogram
    • Statistics – the mode of statistic
    • Smart – the mode of filtering of incorrect measurements

Specification

UCI probe types 1kgf (10N) 2.2 lbf, 5kgf (50N) 11lbf, 10kgf (98N) 22lbf
Measuring range (with standard calibration) HV:230~940; HRC:20~70; HB:90~650. Tensile strength, MPa 370~1740
Measuring accuracy HV:±3%HV; HRC:±1.5%HRC; HB:±3%HB
Indenter Diamond indenter (UCI)
Measuring direction Any direction 360°
Data storage Limited only by the memory card
Communication Upload data to PC and export as a spreadsheet (USB cable and software included )
Hardness scale HRC, HB, HV, HRB, HS, HL, MPa
Materials Pre-calibrated for steel, has calibration scales for additional custom materials
Data display Load applied/contact (UCI), Single test result, Max, Min, Average of tests, Number of tests, Deviation, Var. coeff, Histogram, Signal and Smart Mode (Filter of incorrect measurements)
Indication Color LCD display (320×240)
Operating environment Temperature:-20°C~40°C; Humidity: 30%~80%R.H.
Power supply DC 4,5V (3 pcs batteries AA)
Instrument dimensions 160x75x30mm
Net weight Approx. 0.3kg (without probe)
Batteries life Approx. 10 hours

UCI Ultrasonic Hardness Tester Novotest T-U3 Kit Contents

  • Hardness tester
  • UCI probe
  • 3 AA batteries
  • Charger
  • USB cable
  • Operating manual
  • Case

Pin It on Pinterest