The ASAMS 24 ROV Subsea MPI Black Light is ideally suited for ROV use. The combined ballast & igniter unit eliminates the requirement for a separate ballast pod reducing valuable weight and space on the vehicle.
Typical uses are Fluorescent dye tracing and petroleum based leak detection.
Based on the successful 12 Volt battery operated MPI system the unit lends it self as part of a vehicle mounted MPI unit, the detachable handle allows it to be frame or manipulator mounted.
Reducing the depth capability of the original lamp from 300 metres to 60 metres enables us to increase the UV output to around 3.40MW at 400mm, should depths greater than 60 metres be required the lamp can be re-
The pressure housing lamp is fabricated from anodised aluminium alloy and is pressure tested at 140 bar. The electronic control system used for the gas discharge bulb in the UV lamp enables maximum UV output to be produced within 30 seconds of switching on the lamp.
- Weight: 4 Kg in air
- Dimensions: 110 x 230 x 233 mm
- Typical U/V Output: 2.4 Mw @ 400 mm
- Depth Rating: 300 metres